Hoover S1223 - Manual (Page 19)

HOSE DOOR
\
and tools
The tools are attached to the hose
or the wand in the same manner.
Push tool firmly onto hose; twist tool
slightly to tighten or loosen connec-
tion.
Use cleaning tools with cleaner
handle in upright position.
Clearing
obstructions
To check for obstructions, first turn
cleaner and disconnect from
electrical outlet; then disconnect
hose from cleaner. Open hose
door and carefully remove any
visible obstruction. If no obstruc-
tion is found, check hose and tools.
Remove obstruction. To continue
using tools, re-attach hose to
cleaner. If no obstruction is found
and a problem persists, contact
your Hoover Factory Service
Center or an Authorized Warranty
Service Dealer (Depot).
How to clean tools
To clean the hose, wipe off dirt with a cloth dampened in a liquid
detergent. Rinse with a damp cloth. Cleaning tools may be washed in
warm water with a detergent. Rinse and air dry before using.
Maintenance
The following sections are concerned with proper maintenance of the
cleaner. Familiarize yourself with these home maintenance tasks and keep
this owner’s manual in a convenient place where you can refer to it when
needed. Proper use and care of your cleaner will ensure continued
cleaning effectiveness.
16