HP XB4000 - Manual (Page 8)

Rear panel components
Component Description
(1) Power connector 1 light On: The docking station is on.
(2) Power connector 1 Connects the docking station to a Smart AC
adapter.
(3) Power connector 2 light On: The docking station is on.
(4) Power connector 2 Connects the docking station to a standard AC
adapter.
(5) USB ports (4) Connect optional USB devices.
Power is always on to all USB ports when the
docking station is connected to AC power.
NOTE: There are 2 additional USB ports on the
right panel of the docking station.
(6) RJ-45 (network) jack Connects an Ethernet network cable.
(7) External monitor port Connects an optional external VGA monitor or
projector.
(8) S/PDIF (Sony/Philips Digital Interface)
digital audio jack Connects an optional compatible audio/video
receiver through a digital coaxial cable (purchased
separately).
(9) Hard drive power connector Connects an optional HP Personal Media Drive to
additional external AC power, if desired.
4 Chapter 1 Getting started ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/