HP XB4000 - Manual (Page 12)

Setting up the docking station
Step 1: Adjusting the docking station
The docking station must be upright before a computer can be docked. To adjust the docking station to
an upright position:
1. Lower the lever (1) located on the left side of the docking station upper panel to the down position.
2. Grasp the upper panel (2) with both hands, and tilt the panel toward you.
3. Lift the lever (3) to the up position to lock the upper panel position.
To lower the docking station:
1. Lower the lever (1) located on the left side of the docking station upper panel to the down position.
2. Grasp the upper panel (2) with both hands, and tilt down.
8 Chapter 1 Getting started ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/