HP de100c - Manual (Page 84)

82 hp digital entertainment center owner’s guide
step 3: check setup
turn on your system
Turn on all components in your setup:
■ your digital entertainment center
■ your television (with video input set to the appropriate input source)
■ your receiver (with audio input tuned to the appropriate setting)
■ any daisy-chained components (such as a VCR)
After a short startup sequence, you will see welcome to the digital entertainment center on
your TV screen.
note If you don’t see the welcome screen, see “about component with multiple inputs” below, and
refer to the table on page 83.
Your digital entertainment center is now connected. Proceed to “step 4: configure” on
page 84.
about component with multiple inputs
In many entertainment system setups, it is common for components to get input from more
than one source. For example, your TV might take input from a VCR and a gaming system, or
you might pass video from both your cable system and your digital entertainment center
through your VCR. Any component that can accept multiple inputs provides a way for you to
choose which input you want the component to “pay attention to” — which source it should
pass on to the connected output device (TV or speakers).
If any component in your digital entertainment setup is using multiple input sources, you’ll
need to set the component to accept or display the correct input. The table on the next page
outlines some possible scenarios and solutions. You may need to refer to the specific
component’s owners guide for instructions.