HP de100c - Manual (Page 24)

22 hp digital entertainment center owner’s guide
power modes
on/off and sleep mode
When you quickly press and release the Power button, the digital entertainment center
processes for a moment then enters sleep mode (rather than turning off completely), and
the cooling fan runs quietly. This sleep mode allows the digital entertainment center to power
up quickly when you turn the device back on. From sleep, the device powers on to the
home screen.
You can power down the device completely by pressing and holding the Power button for six
seconds. The cooling fan will turn off and the software will reset.
If the device has been powered off or has experienced a power loss, the next power-on
will require a one- to two-minute startup sequence and will bring you to the initial welcome
screen.
screen saver
Because some TV screens may be susceptible to burn-in, or low-grade damage to the screen
image when static images are displayed for an extended time, the digital entertainment
center switches to a screen-saver mode when it is inactive for 10 minutes: the TV displays a
screen saver and the front-panel display dims. To restore the regular views, press any button
on the remote or the front panel. (The first button press simply refreshes the screen and is not
processed.)
tip
If your digital entertainment
center stops responding,
you can reset the system by
pressing and holding the
Power button for six seconds
to power off, and then
powering on again.