HP de100c User Manual
Page 83
hp digital entertainment center owner’s guide
81
in
st
alli
ng
an
d se
tti
ng
u
p
connect dial-up or broadband
Refer to “c” on the diagram on page 78. Follow the instructions in the appropriate column in
the table below.
power up
Refer to “d” on the diagram on page 78.
1
Connect the power cord to the de100c and plug it into a grounded wall outlet.
2
Put the batteries into the remote control.
dial-up
broadband: Ethernet
broadband: Home PNA
Use the phone cord
provided:
Use your purchased Ethernet
cable:
Use the phone cord
provided:
1
Connect one end of the
phone cord to one of the
de100c’s phone jacks.
2
Connect the other end to
a phone jack in your
home.
If your router or home
network requires an Ethernet
connection:
1
Connect one end of your
Ethernet cable to the
de100c’s Ethernet port.
2
Connect the other end to
your router (or to a
networked RJ45 jack in
your home).
If you have a home
phoneline network (your
home is networked to your
router via telephone wire
within the walls):
1
Connect one end of the
phone cord to one of the
de100c’s phone jacks.
2
Connect the other end of
the phone cord to a
networked phone jack in
your home.
tip
To share a household phone jack
between your de100c and a
telephone, either:
■
plug the phone splitter into
your household phone jack,
then connect the de100c and
the phone to the splitter
or
■
plug your telephone’s cord
into the de100c’s second
phone jack