HP Fax 650 - Manual (Page 15)

Arrange network cables.
To help keep the network cables orderly—and out of the way when
interface cards are being removed or installed—arrange the cables over
the bars at the right of the router.
These cable-management bars have slots in them that you can use for
tie-wrapping the network cables. Included with each interface card is a
tie-wrap that you can use to wrap the cables and then attach the bundle
to the cable management bar, as shown in figure 13.
Some cables (such as WAN cables) will not fit inside the cable manage-
ment bars. You can use the tie-wraps to bundle the extra cables and
hang them on the outside of the bar.
Figure 13. Cable-Management Bar and Tie-Wrap
Installation
Arrange network cables.
15