HP Snapon EAZ0012L02A - Manual (Page 12)

Page 12 of 16
EAZ0012L02A (01/16/2008) REV A.
29. From the A: prompt type “Snapon” and press .
30. A message indicating 1 file copied should be displayed, if not you are not in the correct drive or
the floppy disk is bad, verify the problem and retry running the snapon batch file.
31. Exit the DOS window by typing H[LW at the DOS prompt and press .
32. To make sure the new settings take effect you will need to reboot your unit. Reboot the unit by
selecting Start ⇒ Shut down ⇒ Shut down the computer ⇒ Yes.
33. Click on “Sun Machine Analyzer” in the Sun Machine Tool Bar.
34. Click on <Continue> after calibration.
35. Select <Utilities> from the top menu bar.
36. Select <Tester Setup>, and then select <Printer Type>.
37. Select <Laser Jet 4>.
38. Close “Utilities”
PRINTER INSTALLATION COMPLETE FOR
OKI B4400 PINTER ON SUN MACHINE ANALYZERS
WITH WIN 9X OS