HP Snapon EAZ0012L02A - Manual

EAZ0012L02A (01/16/2008) REV A.
INSTALLATION OVERVIEW:______________________________________________
These instructions are for the installation of an Off-the-Shelf Oki B4400 printer for all OBIS Analyzers, SIS
Machine Bar 97 Analyzers, Sun Machines and MCS-2500 for Pep Boy units. When installing this new
printer a Utility Disk, will be needed to configure the Oki B4400 printers to work correctly with SIS
analyzers & Sun Machine Analyzers.
NOTE: A SEPARATE SHEET METAL DRAWER KIT (EAK0226L00A) MAY BE REQUIRED , WHEN
REPLACING AN EXISTING O KIDATA 6E, 10E OR 14E PRINTER WITH A N O KI B4400 PRINTER .
O RDER AND INSTALL THIS KIT FIRST , BEFORE CONTINUING . T HIS KIT IS NOT REQUIRED IF AN
O KIDATA B4200, B4250 OR B4400 PRINTER WAS PREVIOUSLY INSTALLED .
NOTE: T HE O KIDATA B4400 PRINTER IS ONLY APPROVED FOR THE F OLLOWING S TATE E MISSIONS
BELOW :
OBIS North Carolina
OBIS Pennsylvania
OBIS Texas
Virginia BAR-97
California BAR-97
Texas ASM BAR-97
New Jersey BAR-97
Ontario BAR-97 (GAS)
Ontario BAR-97 (HD)
Pennsylvania BAR-97
PARTS NEEDED FOR INSTALLATION (may need to be ordered separately) : ____________
PART NUMBER
DESCRIPTION QTY
3-03306A25 Oki B4400 LED Printer 1
3-13926AUSD3 Printer Utility Disk 1
EAZ0012L02A Installation Instructions 1
Model: EAZ0012L02A
Okidata B4400
Printer Instructions
Page: 1 of 16
Installation Instructions
IT IS RECOMMENDED THAT THIS BE PERFORMED
BY A
QUALIFIED SNAP-ON EQUIPMENT TECHNICIAN