Hard drive – HP DM4 User Manual
Page 51
Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket.
NOTE:
The hard drive cable is included in the Cable Kit, spare part number 608227-001.
Description
Spare part number
750 GB, 7200 rpm
678103-001
640 GB, 7200 rpm
678102-001
500 GB, 7200 rpm
678101-001
320 GB, 7200 rpm
678100-001
160 GB solid-state drive
608215-001
Hard drive mounting hardware
672516-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
).
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two captive Phillips M2.5×5.0 screws (1) that secure the hard drive cover to the
computer.
3.
Lift the cover up at an angle (2) and remove it (3). The hard drive cover is included in the plastics
kit, spare part number 636942-001.
4.
Disconnect the hard drive cable from the system board (1).
Component replacement procedures
43