HP PhotoSmart R967 - Manual (Page 8)

Camera dock and insert
When setting up the dock for use with this camera, install the dock insert that shipped in
the camera box. Attach the dock insert to the top of the camera dock by snapping it into
place.
2 3
1
1 Camera/dock connector.
2 USB connector.
3 Power adapter connector.
Before taking pictures
Complete the following procedures before taking pictures or recording video clips.
Install the battery
1. Open the Battery/Memory card door by sliding
the door latch as indicated on the Battery/
Memory card door.
2. Insert the battery in the larger slot, pushing the
battery in until the latch catches.
3. Close the Battery/Memory card door.
Note Turn off the camera before removing
the battery. Fully charge the battery before
using it the first time (see
Charge the battery
on page 9 ).
Chapter 1
8