HP PhotoSmart R967 - Manual (Page 32)

Viewing image information
The Image Info screen shows the settings used when capturing the currently displayed
image or video clip.
1 Shutter speed and F-number (aperture).
2 ISO Speed.
3 Non-default shooting mode (see Using the shooting modes on page 19 ),
Flash (see Setting the flash on page 19 ), and Focus setting (see Using the
focus range settings on page 17 ).
4 All non-default Capture Menu settings except Image Quality.
5 Histogram displaying, left to right, the distribution of dark, mid-range, and light
pixels in the captured image.
6 Memory card indicator.
7 File name of the image.
8 File size of the image.
9 Date and time image was captured.
10 Image Quality setting at which the image was captured.
11 The information in the two rows in the bottom, right corner of the image is the
same provided in Playback.
Viewing slideshows
Select View Slideshow to configure and run a slideshow of images and/or video clips
on the camera Image Display or on a TV (if the camera is docked in an optional
HP Photosmart premium dock or wireless dock base and connected to a TV).
●
EXIT—Returns to the Playback Menu without viewing the slideshow.
● Start Slideshow—Starts the slideshow.
● Images—Plays the specified images: All (default), Favorites, Stills Only, Videos
Only, This Image.
● Interval—Sets the amount of time each image is shown: 2 secs, 5 secs
(default), 10 secs, 15 secs, 60 secs, Manual (press
to manually advance the
images in the slideshow).
Chapter 3
32