HP PhotoSmart R967 - Manual (Page 45)

7 Using the Setup Menu
The Setup Menu allows you to set preferences for the camera’s behavior.
1.
While in Live View or Playback, press , then use to highlight .
2. Use to highlight a menu option, then press to display the menu option’s
sub-menu.
3. Use to highlight a setting, then press .
4. To exit the Setup Menu, press .
Settings you specify remain until you change them.
Display Brightness—Adjusts the brightness of the Image Display.
●
Low—For extending battery life.
● Medium (Default)—For normal viewing conditions.
● High—For very bright lighting conditions.
Sounds Volume—Adjusts the speaker volume for camera sounds (such as
button presses and shutter clicks) and recorded audio.
Off, Low (Default), High.
Focus Assist Light—Enables the focus assist light used in low-light
situations. You may want to turn off this feature when you do not want to
distract the subject of your picture.
Auto (Default), Off.
Display Timeout—Specifies the time after which the Image Display turns off
if you do not press a button.
Never, 15, 30, 45 (Default), 60 seconds.
Instant Review—Adjusts the time an image or video clip is displayed in
Instant Review.
Off, 1, 2 (Default), and 4 seconds.
Digital Zoom—Enables or disables digital zoom.
On (Default), Off.
Date & Time—Sets the date and time. See Set the date and time
on page 9 .
USB Configuration—Specifies how a computer recognizes the camera. See
Connecting to the computer on page 39 .
● Digital Camera (Default)——Recognizes the camera as a digital camera
using PTP (Picture Transfer Protocol).
● Disk Drive—Recognizes the camera as a disk drive using MSDC (Mass
Storage Device Class).
HP Photosmart R967 Digital Camera 45