Using focus lock, Optimizing exposure, Other recommendations – HP PhotoSmart R967 User Manual
Page 16: Using
Using Focus Lock
Use Focus Lock to focus on a subject that is not in the center of the picture, to capture
action shots more quickly by pre-focusing in the area where the action will occur, or to
focus in low light or low contrast situations.
1.
Frame the subject for your picture within the focus
brackets. In low light or low contrast situations,
frame a brighter or higher contrast object.
2.
Press the Shutter button halfway down.
3.
Hold the Shutter button halfway down and re-
frame.
4.
Press the Shutter button all the way down to take
the picture.
Optimizing exposure
When you press the Shutter button halfway down, the camera also measures the light
level to set the proper exposure. If the camera determines the scene will require a very
long exposure, a shaking hand icon (
) appears. The camera will take the picture, but
it may be blurry because it is difficult to hold the camera still for the length of time required.
Try one of the following:
●
Set the flash to Auto Flash or Flash On (see
●
Set the camera on a tripod or stable surface.
●
If the subject is out of the flash range or you do not have a tripod, set the shooting
mode to Steady Photo (see Steady Photo under
).
●
Turn on more light.
Other recommendations
If an image does not appear to be in proper focus or exposure when you review it in
Playback, use Image Advice (see Image Advice under
) to help you determine how to correct the problem for similar images in
the future. If you can retake an image, you can follow the suggestions in Image
Advice to improve the image you capture.
Because focus and exposure are crucial to good images, you might find these other
topics useful:
●
Topics on blurry, dark, light, or grainy images in
●
Using the focus range settings on page 17
●
Auto Focus Area and AE Metering under
Chapter 2
16