Display assembly – HP 17 User Manual
Page 87
Display assembly
NOTE:
The display assembly spare part kit includes the display panel cable, webcamera/
microphone module and cable, and 2 wireless antenna cables and transceivers.
Description
Spare part number
17.3-in, FHD, AG, LED, FG, 3D display assembly in natural silver finish
665913-001
17.3-in, FHD, AG, LED, FG, 3D display assembly in natural silver finish with Bluetooth module
(includes Bluetooth module and cable)
668995-001
17.3-in, FHD, AG, LED, FG, 2D display assembly in natural silver finish
665912-001
17.3-in, FHD, AG, LED, FG, 2D display assembly in natural silver finish with Bluetooth module
(includes Bluetooth module and cable)
668994-001
17.3-in, HD, AG, LED, FG, 2D display assembly in natural silver finish
665911-001
17.3-in, HD, AG, LED, FG, 2D display assembly in natural silver finish with Bluetooth module
(includes Bluetooth module and cable)
668993-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the subwoofer (see
6.
Disconnect the antenna cables from the WLAN module (see
7.
Remove the hard drive (see
8.
Disconnect the antenna cables from the wireless audio module (see
9.
Remove the top cover (see
).
Remove the display assembly:
1.
Close the computer.
2.
Turn the computer upside down, with the front toward you.
3.
Release the wireless audio module antenna cables (1) from the clips and routing channel built into
the base enclosure.
ENWW
Component replacement procedures
79