System board – HP 17 User Manual
Page 78
System board
NOTE:
The system board spare part kit includes includes 1 GB of discrete graphics subsystem
memory and replacement thermal material. Replacement thermal material is also available in the
Thermal Material Kit, spare part number 634366-001.
Description
Spare part number
Equipped with the Intel HM76 chipset and 7850M graphics subsystem for use only on computer
models equipped with a 3D display assembly
689999-001
Equipped with the Intel HM76 chipset and 7850M graphics subsystem for use only on computer
models equipped with a 2D display assembly
689998-001
Equipped with the Intel HM65 chipset and 6770M graphics subsystem for use only on computer
models equipped with a 3D display assembly
665934-001
Equipped with the Intel HM65 chipset and 6770M graphics subsystem for use only on computer
models equipped with a 2D display assembly
665933-001
Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
).
5.
6.
Disconnect the optical drive connector cable from the system board (see
7.
Remove the hard drive (see
8.
Remove the top cover (see
).
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
Memory module (see
)
●
RTC battery (see
●
●
●
Wireless audio module (see
Wireless audio module on page 54
●
Top speaker (see
70
Chapter 4 Removal and replacement procedures
ENWW