HP XW9300 - Manual (Page 29)

Intel Pro/1000 MT
Gigabit PCI NIC Connector RJ-45
Controller Intel 82540EM Gigabit Controller
Memory Integrated 96Kb frame buffer memory
Data rates supported 10/100/1000 Mbps
Compliance IEEE 802.1A, 802.1P, 802.1P, 802.1Q, 802.2, 802.3, 802.3AB and
802.3u compliant, 802.3x flow control
Bus architecture PCI 2.2
Data path width 32-bit, 33/66 MHz bus interface
Data transfer mode Bus-master DMA
Hardware certifications FCC, B, CE, TUV- cTUVus Mark Canada and United States, TUV- GS
Mark for European Union
Power requirement 1.48 watts @ +3.3V AUX supply with 5V tolerance
Boot ROM support Yes
Network transfer rate 10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T, 1000 Mbps
Environmental Operating temperature 32° to 131° F (0° to 55° C)
Operating humidity 85% at 131° F (55° C)
Dimensions 6.4 x 4.8 x 0.8 in (16.3 x 12.1 x 1.9 cm)
Operating system
driver support Microsoft Windows XP Professional, Microsoft Windows XP
Professional x64 Edition, Red Hat Enterprise Linux
Management
capabilities ACPI, WOL and DMI 2.0, PXE 2.0, WfM 2.0, Intel PROset II utility
Kit contents Intel Pro/1000 MT Gigabit PCI NIC, CD containing Intel PROset II NIC
drivers, quick install guide, product warranty statement
QuickSpecs
HP xw9300 Workstation
Technical Specifications - Communications
DA - 12186 Worldwide QuickSpecs — Version 25 — 4.30.2006 Page 29