Honeywell 2020 - Manual (Page 91)

6 - 3
Codabar
Codabar
Codabar Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the barcode. You
may either transmit, or not transmit Start/Stop characters.
Default = Don’t Transmit.
Codabar Check Character
Codabar check characters are created using different “modulos.” You can pro-
gram the image scanner to read only Codabar barcodes with Modulo 16 check
characters.
Default = No Check Character.
No Check Character indicates that the image scanner reads and transmits bar-
code data with or without a check character.
When Check Character is set to Validate and Transmit, the image scanner will
only read Codabar barcodes printed with a check character, and will transmit
this character at the end of the scanned data.
* On
Off
Transmit
* Don’t Transmit