Honeywell 2020 - Manual (Page 152)

10 - 16
Interleaved 2 of 5 Off I25ENA0 6-9
*On I25ENA1 6-9
Interleaved 2 of 5
Check Digit *No Check Char. I25CK20 6-10
Validate, But Don’t
Transmit I25CK21 6-10
Validate, and Transmit I25CK22 6-10
Interleaved 2 of 5 Mes-
sage Length Minimum (2 - 80) *4 I25MIN## 6-10
Maximum (2 - 80) *80 I25MAX## 6-10
Code 93 Default All Code 93
Settings C93DFT 6-11
Code 93 Off C93ENA0 6-11
*On C93ENA1 6-11
Code 93 Message
Length Minimum (0 - 80) *0 C93MIN## 6-11
Maximum (0 - 80) *80 C93MAX## 6-11
Straight 2 of 5 Indus-
trial Default All Straight 2 of
5 Industrial Settings R25DFT 6-12
Straight 2 of 5 Indus-
trial *Off R25ENA0 6-12
On R25ENA1 6-12
Straight 2 of 5 Indus-
trial Message Length Minimum (1 - 48) *4 R25MIN## 6-12
Maximum (1 - 48) *48 R25MAX## 6-12
Straight 2 of 5 IATA Default All Straight 2 of
5 IATA
Settings A25DFT 6-13
Straight 2 of 5 IATA *Off A25ENA0 6-13
On A25ENA1 6-13
Straight 2 of 5 IATA
Message Length Minimum (1 - 48) *4 A25MIN## 6-13
Maximum (1 - 48) *48 A25MAX## 6-13
Matrix 2 of 5 Default All Matrix 2 of 5
Settings X25DFT 6-13
Matrix 2 of 5 *Off X25ENA0 6-13
On X25ENA1 6-13
Selection
Setting
* Indicates default
Serial
Command
# Indicates a
numeric entry
Page