HONDA SNOWBLOWER HS724 - Manual (Page 69)

67
TECHNICAL & CONSUMER INFORMATION
Emission Control System Information
Source of Emissions
Tampering and Altering
The U.S. and California Clean Air Act
The combustion process produces carbon monoxide, oxides of
nitrogen, and hydrocarbons. Control of hydrocarbons and oxides of
nitrogen is very important because, under certain conditions, they
react to form photochemical smog when subjected to sunlight. Carbon
monoxide does not react in the same way, but it is toxic.
Honda utilizes appropriate air/fuel ratios and other emissions control
systems to reduce the emissions of carbon monoxide, oxides of
nitrogen and hydrocarbons.
Altering or defeating the governor linkage or speed-adjusting
mechanism to cause the engine to operate outside its design
parameters.
Removal or alteration of any part of intake, fuel or exhaust system.
Tampering with or altering the emission control system may increase
emissions beyond the legal limit. Among those acts that constitute
tampering are:
The following instructions and procedures must be followed in order
to keep the Honda engine emissions within the emission standards.
EPA and California regulations require all manufacturers to furnish
written instructions describing the operation and maintenance of
emission control systems.
07/05/29 16:46:13 31767721_068