HONDA SNOWBLOWER HS724 - Manual (Page 21)

19
BEFORE OPERATION
Check the General Condition of the Snowblower:
Check the Engine
Look around and underneath the snowblower for signs of oil or
gasoline leaks.
Check the auger house and the discharge chute for accumulation of
packed snow or ice. Clean the auger housing and discharge chute
before starting the snowblower.
Look for signs of damage.
Check each control for proper operation.
Check the auger and blower for loose or broken bolts. If broken,
replace them with new ones (page
).
Check that all nuts, bolts, screws are tightened.
Check the oil level (page ).
Check the fuel level (page ). Starting with a full tank will help to
eliminate or reduce operating interruptions for refueling.
Check the hydrostatic fluid level in the reservoil (page ). Use only
Honda Hydrostatic Fluid.
Check the skid shoes and scraper for wear. Replace them if
necessary (page
).
49
50
40
38
43
07/05/29 16:39:18 31767721_020