HONDA SNOWBLOWER HS724 - Manual (Page 19)

17
CONTROLS & FEATURES
Work Light
FEATURES
Snow Clearing Bar (equipped type)
WORK LIGHT
SNOW CLEARING BAR
HOLDERS
The light comes ON while the
engine is running, and it goes OFF
when the engine stops. The light
does not come ON when the
engine switch is turned ON unless
the engine is started. The light can
be adjusted up or down.
If the snow discharge chute or
snow blowing mechanism
becomes restricted, stop the
engine and use this bar to remove
the obstruction.
After clearing the obstruction,
wipe the bar clean, and store it in
the holders.
Before removing the obstruction,
be sure to stop the engine, and
make sure that all rotating parts
have come to a complete stop.
Remove the spark plug cap from
the spark plug.
Standard
Optional Kit
HS1132
HS724, HS928
07/05/29 16:38:56 31767721_018