HONDA SNOWBLOWER HS724 - Manual (Page 49)

47
SERVICING YOUR SNOWBLOWER
TRACK ADJUSTMENT
Adjusting Procedure
TRACK
LOCK NUT
TENSION BOLT
ADJUSTING
NUT
1-1/16 1-5/16 in
(27 33 mm)
Make sure the tracks are clean and dry before adjustment. The tracks
cannot be correctly adjusted if clogged with snow or debris, or coated
with ice.
With the snowblower resting on its tracks, check track deflection by
pressing down midway between the wheels with a force of 33 lbf
(15 kgf).
When correctly adjusted, track deflection should be:
After adjustment, tighten the lock
nuts securely.
Loosen the left and right tension
bolt lock nuts at the rear axle, and
turn the adjusting nuts to
correctly tension both tracks. 1.
2.
1-1/16 1-5/16 in (27 33 mm)
07/05/29 16:43:24 31767721_048