HONDA SNOWBLOWER HS724 - Manual (Page 64)

62
TAKING CARE OF UNEXPECTED PROBLEMS
Engine runs, but
snowblower
doesn’t move Possible cause Correction
ENGAGED RELEASED
DRIVE PROBLEMS
Move lever to the
position (page 22 ).
Add hydrostatic
transmission fluid
to the proper level
(page 44 ).
Move shift lever to
forward or reverse
(page 29 ).
See servicing
Honda
snowblower dealer.
See servicing
Honda
snowblower dealer.
Lever is in the
position.
Fluid level is low.
Shift lever is in
‘‘N’’ (neutral).
Drive clutch lever
mechanism or
cable not
functioning
properly.
Drive belt worn,
broken or not on
pullys.
Check
transmission
release.
Check hydrostatic
transmission fluid
level.
Check shift lever
for position.
Check drive clutch
lever.
Check drive belt.
06/11/16 10:21:12 31767721_063