HP 72H3482 User Manual

Page 5

1 Connecting to a Netware 3.12 Server

Windows 95 SR2

Requirements

•

HP Vectra with Windows 95 SR2 installed.

•

IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1
Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98

•

Microsoft Windows 95 SR2 media.

•

Novell Netware 3.12 server that supports Net BEUI, NWLink IPX/SPX,
and NWLink NetBIOS transfer protocols.

Device Configuration

Procedure

1 With the HP Vectra turned off install the IBM Auto 16/4 TR adapter card

into an ISA slot.

2 Insert the IBM TR drivers disk 1 of 4 and power on the machine.

3 After the machine boots, select option 2 “IBM Auto 16/4 Token-Ring ISA

Configuration using LANAID” and hit enter.

4 When prompted, press any key to continue with the LANAID setup

program.

5 Type “/VIEW” and verify the settings as listed above under the heading

“Device Configuration.”

6 Make any changes, exit LANAID, and remove the drivers diskette.

Vectra VL8

Vectra VE7/VE8

Adapter Mode

Auto16 Compatible

Configuration

Automatic

Interrupt

I/O Address

A20

EFC-EFF

RAM Address

D8000-D9FFF

RAM Size

16 Kb

ROM Address

C8000-C9FFF

Token Ring Rate