3 connecting to a windows nt 3.51 server – HP 72H3482 User Manual
Page 15
3 Connecting to a Windows NT 3.51 Server
Windows for Workgroups
3 Connecting to a Windows NT 3.51 Server
Windows for
Workgroups
Requirements
•
HP Vectra with Windows for Workgroups 3.11 installed.
•
IBM Auto 16/4 TR adapter and drivers diskettes ver 2.20
Driver Name: IBMTOK5.386 Size: 46K Date: 9/28/96
•
Microsoft Windows for Workgroups 3.11 media.
•
Microsoft Windows NT 3.51 server that supports Net BEUI, NWLink IPX/
SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
Procedure
1 With the HP Vectra turned off install the IBM Auto 16/4 TR adapter card
into an ISA slot.
2 Insert the IBM TR drivers disk 1 of 4 and power on the machine.
3 After the machine boots, select option 1 “IBM Auto 16/4 Token-Ring ISA
Configuration using LANAID” and hit enter.
4 When prompted, press any key to continue with the LANAID setup
program.
Vectra VL8
VE7/VE8
PnP Support
BIOS
BIOS
Adapter Mode
ISA16 Compatible
-
Configuration
AUTOMATIC
-
I/O Address
A20
EFC-EFF
Interrupt
10
3
RAM Address
D8000-DBFFF
-
ROM Address
-
C8000-C9FFF
Token Ring Rate
-
16