HONDA Outboard Motor BF75A - Manual (Page 19)

17
CONTROLS
LHT Type (tiller handle)
CONTROLS AND FEATURES
IGNITION SWITCH
START ON
OFF
LANYARD
EMERGENCY STOP SWITCH
SWITCH
CLIP
SPARE SWITCH CLIP
Ignition Switch
Switch Clip and Emergency Stop
Switch
The ignition switch controls the
ignition system and starter motor.
Turning the ignition switch key to the
START position operates the starter
motor. The key automatically returns
to the ON position when released
from the START position.
The switch clip must be inserted in
the emergency stop switch in order
for the engine to start and run. The
lanyard should be attached to the
operator’s PFD (Personal Flotation
Device) or worn around the wrist as
shown.
When used as described, the
emergency stop switch and lanyard
system stops the engine if the
operator falls away from the controls.
A spare swtich clip is stored in a slot
in the control housing (optional
equipment).
The engine will not start unless the
gearshift lever (p.
) is in the N
(neutral) position, and the emergency
stop switch clip is in the emergency
stop switch.
Turning the ignition switch to the
OFF position stops the engine.
19
02/03/25 21:16:52 31ZW0601_018