Quickspecs, Hp proliant bl30p server blade options – HP Server Blades BL30p User Manual
Page 24
BL p-Class Interconnects
ProLiant BL p-Class Patch Panel 2 Kit with Fibre Channel pass-through (pair)
306465-B21
NOTE: Only one interconnect kit required per server blade enclosure.
ProLiant BL p-Class Patch Panel (pair)
230766-B21
NOTE: Only one interconnect kit required per server blade enclosure.
ProLiant BL p-Class C-GbE2 Interconnect Kit (with pair of GbE2 Interconnect Switches and two
QuadT2 Interconnect Modules)
283192-B21
NOTE: Only one interconnect kit required per server blade enclosure.
ProLiant BL p-Class F-GbE2 Interconnect Kit (with pair of GbE2 Interconnect Switches and two
QuadSX Interconnect Modules)
283193-B21
NOTE: Only one interconnect kit required per server blade enclosure.
ProLiant BL p-Class GbE2 Storage Connectivity Kit (with pair of OctalFC Interconnect Modules
and two Fibre Channel signal conditioning cards)
321745 -B21
NOTE: Required for BL30p Fibre Channel signal pass through when using the GbE2 Interconnect
Switch.
NOTE: Only one Storage Connectivity Kit required per each GbE2 Interconnect Kit.
ProLiant BL p-Class C-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two
QuadT Interconnect Modules)
249655-B21
NOTE: Only one interconnect kit required per server blade enclosure.
NOTE: The GbE Interconnect Switch supports server NIC speeds to 100 Mbps. It is
recommended that a Patch Panel Kit or GbE2 Interconnect Switch Kit option be used if server
NIC speeds to 1000 Mbps are required.
NOTE: To meet applicable radio frequency (RF) emission limits, the sidewall panels on the ends
of any individual rack or a series of coupled racks and the front and rear doors must be installed
in any racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.
ProLiant BL p-Class F-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two
DualTSX Interconnect Modules)
279720-B21
NOTE: Only one interconnect kit required per server blade enclosure.
NOTE: The GbE Interconnect Switch supports server NIC speeds to 100 Mbps. It is
recommended that a Patch Panel Kit option be used if server NIC speeds to 1000 Mbps are
required.
NOTE: To meet applicable radio frequency (RF) emission limits, the sidewall panels on the ends
of any individual rack or a series of coupled racks and the front and rear doors must be installed
in any racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.
BL p-Class Power Options
NOTE: Use p-Class sizing tool to help determine power configuration:
Single Phase Redundant Power Enclosure with 4 power supplies
(Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to order
additional power supplies with this option kit)
239162-001
3 Phase Redundant Power Enclosure with 6 power supplies
(3 Phase Power Enclosure holds a maximum of 6 power supplies; no need to order additional
power supplies with this option kit)
230769-001
Single Phase Power Enclosure (empty)
(Holds up to 4 power supplies; power supplies are not included in this kit)
231710-001
3 Phase Power Enclosure (empty)
(Holds up to 6 power supplies; power supplies are not included in this kit)
231709-001
Single Power Supply
239161-B21
Facility DC Power Connection
240563-B21
QuickSpecs
HP ProLiant BL30p Server Blade
Options
DA - 11958 North America — Version 6 — September 24, 2004
Page 24