HP PL4272N - Manual (Page 15)

Getting to
Know Y
o
u
r TV
Getting to Know Your TV 5
TV (rear) Description
■ Service Port Used for repair
purposes only.
■ Serial RS-232 Used for commercial
purposes only.
■ ANT/Cable In Connect a coaxial cable
from an off-air antenna or
cable signal source.
Standard
Definition Input:
■ AV1: S-Video
In, Video In,
and Audio In L
and R
■ AV2: S-Video
In, Video In,
and Audio In L
and R
For each AV connector set:
■ Connect an S-Video
cable and left-right
audio cables from
optional equipment.
Or
■ Connect a composite
video cable and left-
right audio cables from
optional equipment.
(Audio In L and R connectors
are shared within the AV
connector set.)
!
Do not connect video cables to both the
S-Video In and the Video In connectors.
TV (rear) Description
High Definition
Input:
■ 1: Component
In Y, Pb, and Pr,
and Audio In L
and R
■ 2: Component
In Y, Pb, and Pr,
and Audio In L
and R
Connect component video
cables and left-right audio
cables from optional
equipment. Supports 480i,
480p, 720p, and 1080i
analog standard and
high-definition format
inputs. The TV automatically
determines what has been
connected. Some set-top
boxes must be set for a
specific output resolution.
Digital High
Definition Input:
■ HDMI 1 with
HDMI Audio
In L and R
■ HDMI 2
■ HDMI 3 (select
models only)
Supports 480i, 480p,
720p, 1080i, and 1080p
digital format inputs. The TV
automatically determines
what has been connected.
Some set-top boxes must
be set for a specific
resolution out.
For each HDMI
(High-Definition Multimedia
Interface) connector:
Connect an HDMI cable
from optional digital, high-
definition equipment.
For HDMI 1 with HDMI
Audio Input: Connect a DVI
cable and DVI-to-HDMI
converter from optional DVI
equipment and connect left-
right audio cables to HDMI
Audio In L and R.
PC Input:
■ VGA
■ Audio L/R
Connect a VGA cable and
an audio cable from your
PC (Line Out) to use the TV
as a monitor.
Audio Output:
■ Digital
(Optical)
■ Audio Output
L and R
For sound to an external
audio system:
■ Connect an optical
cable for digital sound
out to an optional
external digital audio
system.
■ Connect left-right audio
cables for stereo sound
out to an optional
external (analog) audio
system. Use the left
(white) connector for
mono sound (single
cable).
■ AC In Connect the included AC
power cord.
NOTE: Use only the
provided power cord.
TV (rear) Description (Continued)