Hitachi L37A01A - Manual (Page 31)

29
TV SETUP OPERATION (continued)
Audio Setting
You can adjust and customize the audio conditin as you like.
1. Press button.
2. Select “ Audio” menu and press button.
3. Select the preferred menu item and press button.
Favorite
Off
Off
Off
On
Reset
Audio
Audio Mode
Treble
Bass
Balance
Matrix Surround
Dynamic Bass
Perfect Volume
TV Speakers
Reset
Select OK Set Return
0
0
0 L R
Selected Items Setup hint
Movie
Music
Speech
Audio Mode
Favorite
You can select the most suitable sound condition from these 4 items.
You can adjust any value you preferred in “Favorite” item.
Treble -15~+15 Adjust the Treble of the sound.
Bass -15~+15 Adjust the Bass of the sound.
Balance -10~10
Adjust the balance of the sound comes out from right and left side of
the speakers.
(Notice: When Matrix Surround is enabled, adjusting the Balance will
not completely mute any one speaker.)
Off
Matrix Surround
On
The surround sound is mixed to left and right in order to create the
illusion of virtual surround speakers.
(Recommendation: when the Matrix Surround is on, ensure the
Balance is set to "0" for optimum surround sound effect.)
Off
Dynamic bass
On
Dynamic Bass gives you the enhanced bass sound. Low frequency
signals can be boosted while the output signal amplitude is measured.
Off
Perfect Volume
On
Automatically adjusts audio input levels to stay within a safe volume
range. For example, when the input sound is too loud, the volume is
automatically decreased.
Off
TV Speakers
On
This needs to be switched to Off when you want to listen to audio
from external equipment.
It is normally set to On when you operate the set using the built in
speakers.
Reset
Each item on this menu screen can be restored to the
original factory settings by pressing
button.