Hitachi VT-UX617A - Manual (Page 42)

The VCR will not mark commercials.
To play back tapes recorded using Commercial Advance:
Press the (2) button to select or .
Select <AUTO> to play the marked commercials in the forward search mode automatically.
Select <MANUAL> if you don't want to play the commercials in the forward search mode. If is
specified, the marked commercials are played in the forward search mode only when the CA SKIP button on the
remote control is pressed.
To select a background for playback:
Press the (3) button to select or .
Select <BLUE> if you want the screen to become blue when the commercials are being skipped.
Select <VIDEO> if you want to play the commercials in the forward search mode when they are being skipped.
3 Press the GUIDE button to end the setting.
"This product incorporates Commercial Advance circuitry that eliminates most commercial messages during
replay of a recorded television broadcast. Under controlled test conditions with major network daytime and
prime time broadcasts, approximately 96% of intraprogram commercials are eliminated.
* Actual test results may vary and will depend upon the quality of television reception and the nature of
programming recorded."
* For a copy of the complete test report please write to:
Arthur D. Little Enterprises
Acorn Park
Cambridge, MA 02140-2390 USA
Note: If a power failure has occurred during recording, CM SEARCH will not be performed precisely.