Hitachi VT-UX617A User Manual
Page 31
The VCR can be programmed to:
Automatically select channels on the cable box during a timer record or VCR Plus+ delayed recording operation.
Change channels on remote controlled cable boxes with the VCR remote control.
BEFORE YOU BEGIN...
Make sure the cable box is positioned properly on the VCR.
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Press the GUIDE button. Click to see remote control illustration.
The main on-screen menu will appear on the TV screen.
3 Press the (4) button to select the CHANNEL PRESET operation.
4 Press the (5) button to select "CABLE/DSS BOX SETUP" menu.
5 Press the (1) button to answer "CABLE" to the question "WHICH SYSTEM DO YOU USE?"
• Press the (3) button for normal TV viewing. Also press (3) to release the CABLE BOX or DSS BOX setting
after you have set it up.