Hitachi VT-UX617A - Manual (Page 12)

14 PAUSE button 34
15 Shuttle ring 38
16 LIGHT button - illuminates
key function buttons for a
few seconds 8
17 CA SKIP button 36
18 STOP button - stops play/
record function 25
19 F.FWD button - fast forward
or search 34
20 CH (channel up/down) button 43
21 LAST CH button - switches
to the TV channel you watched
previously during the current
viewing session 63
22 MUTE button - turns off the
audio until you press MUTE
again 63
23 MENU button 32
24 SELECT button - used to
select the program using Tape
Navigation 58
25 AVX button - select L1 or L2 64
26 Number buttons 24
27 CC button - used to display
captions on the screen 62
* Refer to the camcorder's instruction manual for its operation.
REMOTE OPERATION
Install batteries in the remote control
The remote control requires two "AA" batteries.
1 Push the mark and hold it, then slide the cover in the direction of the arrow to remove it.
Note: When replacing the batteries, remove the old batteries and keep the POWER button depressed for 10
seconds before inserting fresh batteries.
2 Install batteries.
• Align the positive (+) and negative (-) polarity marks on the batteries with those indicated on the remote
control.