Maintenance – Husqvarna 14 Pro User Manual
Page 27
English –
25
MAINTENANCE
Removing the cutting unit
1. Apply the parking brake, see page 10.
2. Adjust the cutting height to its lowest setting.
3. Remove the front hood, as described on page
18.
4. Fit the support wheels.
WARNING!
Wear protective glasses when
removing the cutting unit. The
spring which tensions up the belt
can go off and cause personal
injury.
!
5. Relieve the tensioning wheel by disconnecting
the spring.
6. Lift the drive belt off the cutting unit drive pulley.
7. Pull out the pin.
See also other documents in the category Husqvarna Gardening equipment:
- 128LD (71 pages)
- 125B (47 pages)
- HEDGE TRIMMER ATTACHMENT (32 pages)
- 2754 GLS (49 pages)
- 532424761R1 (48 pages)
- 650CRT (28 pages)
- 1200-18 (68 pages)
- 324LD (32 pages)
- 324LD (28 pages)
- Hedge Trimmer 123HD65X (24 pages)
- 96045000410 (45 pages)
- 325L (36 pages)
- 966582101 (56 pages)
- 7021CP (18 pages)
- 11 (56 pages)
- 325HE4 x-series (24 pages)
- 323HE3 (24 pages)
- 325HDA65X-Series (24 pages)
- 326HD60 (24 pages)
- 5521RS (22 pages)
- Viking CA 150 (12 pages)
- 20 ProFlex (48 pages)
- 70 LP (8 pages)
- 326ES (32 pages)
- 250R (48 pages)
- 232L (32 pages)
- 227L/LD (32 pages)
- 965921501 (76 pages)
- 250 R (52 pages)
- 7021F (21 pages)
- 965969401 (8 pages)
- 210 C (50 pages)
- 210 C (48 pages)
- 966614401 (72 pages)
- 6022SH (18 pages)
- DRT 900 DRT 900 (29 pages)
- 142 RB (29 pages)
- 380 (9 pages)
- 96143005700 (18 pages)
- T 50RS (21 pages)
- 1200 (40 pages)
- 1200 (35 pages)
- H342SG (10 pages)
- 326R (36 pages)
- 125LDx (23 pages)