Hitachi VM-H39A User Manual

Page 34

IDENTIFICATION AND OPERATION OF CONTROLS

Bottom view/Remote Control Illustration

21. Power Switch
This turns the camera/recorder on and off and also switches between the camera and
VCR modes. Set the switch to "CAMERA" to turn the camera's power on and to
"VIDEO" to turn the VCR's power.
Press and hold the small red button in the switch to switch it.
22. "PLAY" Button
Used for playback of tapes.

NOTE: When the camera/recorder is in record/pause (stand-by) mode, pressing and
holding this button will play the tape at normal speed.

23. "F.FWD" Button
Press this button during stop or rewind mode, and fast-forwarding starts.
Press the button during playback of tape, and the tape is played back in the forward
direction approximately 9 times faster than the normal speed to confirm the recorded
content.
Press "PLAY" button to return to normal playback mode or press "STOP" button to stop
tape movement. Also use "F.FWD" button when setting the date/time.

NOTE: You can also visually scan forward when the camera/recorder is in record/pause
(stand-by) mode by pressing and holding this button.

24. "REW" Button
Press this button during stop or fast forward mode, and fast-rewinding starts. Press the
button during playback of tape, and the tape is played back in the rewind direction
approximately 7 times faster than the normal speed to confirm the recorded contents.
Press "PLAY" button to return to normal playback mode or press "STOP" button to stop
tape movement. Also use "REW" button when setting the date/time.

NOTE: You can also visually scan backward when the camera/recorder is in record/pause
(stand-by) mode by pressing and holding this button.

25. "STOP" Button
The "STOP" button is used to stop playback, rewind, and fast forward operations. The
"STOP" button has no effect during camera record operation. Also use "STOP" button
when setting the date/time.
26. "PAUSE" Button
When this button is pressed in the playback mode, the tape stops and you can view a
still picture. When this button is pressed again, the tape runs to resume playback.
27. "TITLE" Button