Hitachi VM-H39A - Manual (Page 22)

POWER SOURCES
22
2. Slide the battery downward and off.
WHEN USING WITH THE AC ADAPTER/CHARGER (provided)
1. Plug the AC adapter/charger power cord into an AC electrical output; the "POWER"
indicator on the AC adapter/charger will come on.
2. Attach the external power adapter (provided) to the camera/recorder as shown in the
figure. Align the marks and hold the external power adapter flush against the
camera/recorder. Then attach it using the same procedure used when attaching the
battery.
3. Connect the external power adapter plug to the "DC OUTPUT" jack of the AC
adapter/charger.
4. To remove the external power adapter from the camera/recorder, perform the same
procedure as when removing the battery.
NOTES:
• This AC adapter/charger is universal around the world. If you use the camera/recorder in
some foreign countries, an AC plug adapter (not supplied) may be necessary.
• When using the AC adapter/charger to power the camera/recorder, the battery level
indicator may display "
" . This indicator is used for battery operation and has no
meaning when using the Ac adapter/charger to power the camera/recorder.
WHEN USING WITH THE CAR BATTERY (by using optional car battery cord Hitachi
VM-CC80A)