Hunter 28688 44 Stratford Five Minute Fan - Manual (Page 6)

6
42443-01 • 09/20/10 • Hunter Fan Company
To install a ceiling fan, be sure you can do the following:
• Locate the ceiling joist or other suitable support in ceiling .
• Drill holes for and install wood screws .
• Identify and connect electrical wires .
• Lift 40 pounds .
If you need help installing the fan, your Hunter fan dealer can direct
you to a licensed installer or electrician .
Gathering the Tools
You will need the following tools for installing the fan:
• Electric drill with 9/64” bit
• Standard screwdriver (magnetic tip recommended)
• Phillips-head screwdriver (magnetic tip recommended)
• Wrench or pliers
• Ladder (height dependent upon installation site)
Checking Your Fan Parts
Carefully unpack your fan to avoid damage to the fan parts . Refer to
the included Parts Guide . Check for any shipping damage to the motor
or fan blades . If any parts are missing or damaged, contact your Hunter
dealer or call Hunter Technical Support Department at 888-830-1326 .
(In Canada, call 866-268-1936) .
Installing Multiple Fans?
If you are installing more than
one fan, keep the fan blades and
blade irons (if applicable) in sets,
as they were shipped .
1 • Getting Ready