Hunter 28688 44 Stratford Five Minute Fan - Manual (Page 15)

15
42443-01 • 09/20/10 • Hunter Fan Company
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Uninstalling the Light Fixture
7-12 . To uninstall the light fixture, first disconnect the plug connectors
between the black wire and the black wire with a white
stripe .
7-13 . Disconnect the plug connectors between the two white
wires .
7-14 . Remove the two screws attaching the light kit to the lower
switch housing .
7-15 . Remove the light fixture from the lower switch housing,
pulling disconnected wires through the hole in the center of
the lower switch housing .
Note: When removing the wires, pull the thin plug
connector (male) through first, and then pull the other plug
connector (female) through the hole .
7-16 . Install the dummy terminals (included in the sack parts) on
the two disconnected wires in the lower switch housing .
7-17 . Install the switch housing cap and plug button to the lower
switch housing .
7-18 . Once you have uninstalled the light fixture, continue
with Step 7-1 .
Male Dummy
Terminal
Female Dummy
Terminal
Step 7-17
Cap
Plug Button
Lower
Switch Housing
Threaded Rod
Steps 7-14 – 7-16