Hunter 28688 44 Stratford Five Minute Fan - Manual (Page 17)

17
42443-01 • 09/20/10 • Hunter Fan Company
Problem: Nothing happens; fan does not move.
1 . Turn power on, replace fuse, or reset breaker .
2 . Loosen canopy, check all connections according to the wiring the fan section .
3 . Check the plug connection in the switch housing .
4 . Push motor reversing switch firmly left or right to ensure that the switch is engaged .
5 . Pull the pull chain to ensure it is on .
6 . Remove the shipping bumpers .
Problem: Noisy operation.
1 . Tighten the blade assembly screws and blade iron armature screws until snug .
2 . Check to see if the blade is cracked . If so, replace all the blades .
Problem: Excessive wobbling
1 . Make sure the blades are securely attached to the blade irons according to the blade assembly
instructions provided .
2 . After thoroughly verifying the blades are securely attached to the blade irons, follow the instructions in
the enclosed balancing kit to balance the fan .
3 . Turn power off, support fan very carefully, and check that the hanger ball is properly seated .
If you need parts or service assistance, please call
888-830-1326 (In Canada, call 866-268-1936) or
visit us at our website at
http://www .hunterfan .com .
Hunter Fan Company
7130 Goodlett Farms Pkwy . #400
Memphis, Tennessee 38016
9 • Troubleshooting 9 • Troubleshooting