Henny Penny SCD-6/8 - Manual (Page 6)

Model SCD-6/8
2-8. HEATERS (Continued) 3. Label and remove all wire to heaters and high limit
(Figure 2-12).
4. Pull insulation retainers from the nails and remove insulation.
5. Using a Phillips head screwdriver, remove the high limit from
top heater, or the plate from the bottom heater (Figure 2-13).
Figure 2-13
6. Using a Phillips head screwdriver, remove the 6 screws secur-
ing the heater and remove from the unit (Figure 2-14).
7. Install new 1000 watt heater in reverse order, and restore
electrical power to unit.
Figure 2-12
Figure 2-14
2-6 203