Henny Penny SCD-6/8 - Manual

Model SCD-6/8
2-1. INTRODUCTION This section provides procedures for the checkout and replacement
of the various parts used within the rotisserie. Before replacing any
parts, refer to the Troubleshooting Section. It will aid you in
determining the cause of the malfunction.
2-2. MAINTENANCE HINTS 1. You may want to use a multimeter to check the electric
components.
2. When the manual refers to the circuit being closed, the
multimeter should read zero unless otherwise noted.
3. When the manual refers to the circuit being open, the multimeter
will read infinity.
2-3. LIGHT BULB
REPLACEMENT
Light bulbs and glass may be hot. Severe burns could
result.
1. Unscrew the lamp cover (Figure 2-1).
Figure 2-1
2. Unscrew and remove light bulb, and replace with a new
40 watt bulb - HP part number, BL01-014.
3. Replace lamp cover.
203 2-1
SECTION 2. MAINTENANCE