Henny Penny SCD-6/8 - Manual (Page 10)

Model SCD-6/8
2-11. TRANSFORMER 1. Remove electrical power supplied to the unit.
REPLACEMENT
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
2. Remove the side panel closest to the controls.
3. Label and remove wires to the transformer (Figure 2-19).
Figure 2-19
4. Using 5/16” socket, remove the nuts securing the transformer
and remove transformer from unit (Figure 2-20).
5. Install new transformer in reverse order and restore electrical
power to the unit.
Figure 2-20
2-10 803