Heat & Glo Fireplace 6100PLUS - Manual (Page 22)

22 Hearth & Home Technologies • 6100PLUS • 4041-127 Rev D • 09/05
Placing the Rock Wool
• Place a small amount of 1/2 in. diameter pieces (dime-size)
of rock wool on the burner pan so the rock wool touches but
does not cover the holes in the burner pan. This will provide the
“glowing embers” look. It is not necessary to use the entire bag.
Save the remaining amount for future use. See Figure 10.4.
Placing the Silica Rock (Techno Sil)
• You will need to paint the silica rocks with the supplied
spray paint to create the most realistic look. See Figures
10.5-10.6.
Figure 10.4 Placing the Rock Wool
Figure 10.5 Silica Rocks
Figure 10.6 Painting the Rocks
Figure 10.7 Placing the Silica Rocks
• Place the silica rock so that it completely covers the ember
bed. See Figure 10.7.