Date & time, Usb configuration – HP 930 Series User Manual
Page 72
72
hp photosmart 930 series user’s manual
Date & time
If you press
OK
when the
Date &
Time
option is highlighted in the
Setup
menu, the
Date & Time
screen
displays. This screen allows you to set
the current date and time, as well as
the date/time format, for the
camera. This is usually done when
you first set up the camera; however, you may need to re-set
the date and time when you are travelling to different time
zones, or when the batteries are removed from the camera for
more than 10 minutes.
To set the date, time, and date/time format, follow the same
procedure used in
USB configuration
If you press
OK
when the
USB
option
is highlighted in the
Setup
menu, the
USB Configuration
sub-menu
displays. This sub-menu determines
how the camera is recognized when
connected to a computer.
z
Digital Camera
—Causes the
computer to recognize the camera as a digital camera
using the Picture Transfer Protocol (PTP) standard. This is
the default setting on the camera. Use this setting for
unloading and sharing on a Windows computer that has
the HP Photo & Imaging software installed on it.