HP 930 Series User Manual

Page 69

Chapter 5: Unloading and printing images

To print directly to an HP Photosmart printer or to any other

HP printer with a front panel USB port:

Check that the printer is turned on and

is online. (There should be no blinking

lights on the printer or error messages

displayed about the printer.) Load

paper into the printer, if needed.

Your camera came with a special USB

cable for connecting the camera

directly to a printer. Connect the square

end of the USB cable to the printer.

Open the rubber door on the side of

the camera and connect the small end

of the USB cable to the USB connector

on the camera.
The

Print Setup

menu displays on

the camera. If you already

selected images to print from the

camera

menu, the number

of images selected will be shown,

as in this example

Print Setup

menu. Otherwise,

Images: ALL

will be displayed.

Adjust the settings in the

Print Setup

menu by using the

buttons to highlight a menu option and the

buttons to change the setting for each option.

NOTE

There is a print preview in the lower right-hand corner

of the

Print Setup

screen showing the page layout that will

be used for printing images. This print preview updates as

you change the settings for the

Print Size

and

Paper Size

Press the

button to begin printing.