HP 930 Series - Manual (Page 18)

18 hp photosmart 930 series user’s manual
Restoring previous settings
Some of the settings that you can change in the camera menus
do not remain set after you turn the camera off. However, you
can restore the settings from the last time the camera was on
and had at least one non-default setting (which could actually
be several power cycles ago) by holding down the OK button
while also sliding the ON/OFF switch to turn the camera on.
The restored settings are then displayed across the top of the
status screen. (See the previous section.)
Choosing the language
The first time you turn the camera on, the following screen
appears and prompts you to choose a language.
1 Scroll to the language that you
want by using the buttons
on the Controller .
2 Press the OK button to select the
highlighted language.
Setting the date and time
The camera has a clock that records the date and time at which
you take each picture. The first time you turn the camera on, the
following screen appears after you choose the language.
1 Adjust the value of the
highlighted selection by
using the buttons.
2 Press the buttons to move to
the other selections.