Humax NA-3712 - Manual (Page 31)

Selects the satellite name that corresponds to the value of the
Antenna Alternative.
Press the buttons and the satellite names you can memorize
will be listed on the screen.
Use the buttons to select a satellite name and then press
the button.
This name will help you Select Antenna Alternative In Manual Search
menu.
n n n n o o o o tt tt e e e e :: :: Press User defined and the keyboard image will appear
on the screen. Then you can enter satellite names.
Use the buttons to select a LNB frequency or type on the dish.
You can select the LNB Frequency.
If the required LNB frequency is not available, then press the
Number buttons(0~9) on the remote control.
Use the buttons to select the antenna tone switch when LNB
Frequency is universal.
22KHz tone will be switched automatically.
Use the buttons to select a DiSEqC antenna switch type.
(according to the option and location of DiSEqC switch)
• Type : Disabled, Tone Burst A to B, DiSEqC A, DiSEqC B,
DiSEqC C, DiSEqC D.
It disables/enables the motorise function.
Set this according to the used antenna.
If you wish to use this system, please refer to page GB37.
It sets the level of LNB voltage. The LNB voltage may be dropped
too low to supply power to LNB owing to long length of the signal
line. To compensate the voltage drop, the item shall be set as “High”.
Satellite Name
LNB Frequency
22KHz Tone
DiSEqC Input
Motorized System
LNB Voltage
Main Menu Guide
GB30