Humax NA-3712 - Manual (Page 23)

You can set a parental guidance rating to each program in this
mode.
1. When the button is pressed after selecting the highlighted
parental control on the initial menu screen, a display window
for entering the PIN Code will appear on the center of screen.
** The default PIN Code is .
2. Enter the PIN Code on the display window.
(If any problem occurs when entering a PIN Code, you cannot
switch to the next mode.)
3. Set the parental guidance rating of highlighted censorship
classification.
Classification: no block or total block.
Enter the PIN Code to unlock or lock programs.
4. To change your PIN Code:
Select the highlighted Old Pin Code using the buttons
and then enter your Old PIN Code.
Enter a New PIN Code in the highlighted new PIN Code
using the buttons.
To verify the New PIN Code, re-enter a new PIN Code in the
highlighted Verify Changed PIN Code.
5. When the entered PIN Code is correct, then all settings are
completed. (If the PIN Code is wrong, the message “PIN Code
mismatch” will be displayed on the display window. When the
button is pressed at this time, the old PIN Code is valid and the
cursor is located in the first position of this menu.)
This mode allows you to customize, add a new service and displays
the state of the STB. Enter the submenus after selecting the
Installation Mode in the Main Menu.
3-1. System Setting
The System Setting mode supports the STB internal settings
according to the connection of the receiver and external units.
This mode includes Language Setting, Time Setting,
A/V Output Setting, VHF Tuning and Other Setting.
2. Parental Control
3. Installation
0 0 0 0
Main Menu Guide
GB22