Hitachi 35UX60B - Manual (Page 79)

AUDIO
79
Use Preference SETTING to improve the sound performance of your TV depending on
listening conditions.
Use the CURSOR , to select a function. The function will be in magenta.
Use the CURSOR , to change function. Your choice will be in blue.
MTS MODE (Multi-Channel Television Sound) will allow you to select STEREO (a
stereo broadcast), SAP (second audio program) which may be a secondary language,
weather report, etc. or MONO (monaural sound) used when receiving a weak stereo
broadcast.
The sources received will be displayed below the channel number. The source you
select will be displayed to the left of the channel number. See example below for each
selection when both stereo and second audio are received (monaural is always
received).
DYNAMIC BASS
This function allows you to enjoy spectacular bass sound that would normally be heard
only with expensive home speaker systems.
LOUDNESS
This function will improve the quality of both low and high frequency sounds when
listening at low volume levels.
INT. SPEAKERS
This function is useful when first setting up the external speakers, or if you prefer to use
only speakers from a separate stereo system. This feature is used to turn the internal
speakers "ON" or "OFF", when the Receiver is connected to an External Audio
Amplifier. This function allow the user to turn off the TV speakers. Therefore, no sound
will be emitted from them. This function is useful when first setting up the external
speakers, or if you prefer to use only speakers from a separate stereo system.