Hitachi 35UX60B - Manual (Page 71)

PROGRAM
71
Press the CURSOR , to select one of the four volume corrections.
Use the Channel , or number buttons to select a channel.
Press ENTER to set the channel.
Press CURSOR , to adjust volume level.
Press MENU to exit.
NOTE:
1. VOLUME CORRECTION adjustment is for the channel displayed in the top right corner
of the screen. To adjust a different channel, you must select the channel with the channel
or number buttons and press ENTER.
2. If the channel has been corrected before, use the cursor
, to highlight that channel
then use the cursor , to change the level.
3. To erase a channel from the volume correction, select channel 00 and press ENTER.
4. The volume level will change from 50% to 100% in 5% steps.